User Manual

10000890 REV B

5 TROUBLESHOOTING

If you experience any problem with your Senza

Bluetooth

Trial System, please see if any of these

troubleshooting recommendations might address that problem. Often, problems with the device turn out to have

simple solutions. If you cannot fix your problem with these recommendations, or if you are having a problem not

described here, contact your doctor.

5.1 Troubleshooting Therapy

5.1.1 If therapy has stopped:

• Check that therapy has not been inadvertently turned OFF.

• Press and hold the gray ON / OFF Button on the upper left side of the Remote Control for up to five

seconds to turn the Remote Control ON.

• Wait for the Remote Control to connect with the Trial Stimulator.

• Check that at least one of the Stimulation Level Indicator lights is on.

• If none of the Stimulation Level Indicator lights is on, press the Stimulation Increase Button to turn

stimulation ON.

• Check that at least one of the Stimulation Level Indicator level lights is on.

• If the Remote Control cannot connect with the Trial Stimulator, it is possible the Trial Stimulator battery is

completely empty.

5.2 Troubleshooting the Rem

5.2.1 If you press the buttons on the Remote Control and nothing happens:

• Make sure the Remote Control is ON. You must turn ON the Remote Control before you use it (the

Remote Control automatically turns itself OFF when not in use). To turn it ON, press and hold the gray

ON / OFF button on the upper left side of the Remote Control for up to five seconds.

• If the Remote Control beeps six times when you turn it ON, the Remote Control batteries may be low.

Stimulation

Increase Button

Stimulation

Level Indicator