User Manual

10000890 REV 02
15
4.1.8 Understanding Signals from the Remote Control
Your Remote Control will beep and light up to keep you informed about your Senza Bluetooth Trial System status.
The following table provides the most common signals you will see and hear from your Remote Control. If you
encounter something that is not shown here, Refer to the Troubleshooting Section of this manual, or contact your
doctor.
What You Hear
What You See
What It Means
One single soft beep
No change in lights.
One of the buttons on the Remote
Control was pressed.
One single regular beep
The therapy level lights or
programs lights change.
Stimulation has increased or decreased
by one level or a new program has been
selected.
Two regular beeps
No change in lights.
You have reached the highest or lowest
stimulation level possible.
Three regular beeps
No change in lights.
The Remote Control is not able to
communicate with the Trial Stimulator.
Refer to the Troubleshooting Section of
this manual.
Continuous beeping for 60
seconds
All battery lights are blinking.
The Trial Stimulator battery is low or
completely empty.
Refer to the Troubleshooting Section of
this manual.
Continuous beeping for 60
seconds
All therapy level lights are
blinking.
One of the leads on the Trial Stimulator
is loose. Refer to the Troubleshooting
Section of this manual.