User's Manual

PAS User Manual
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO NEW CENTURION SOLUTIONS, INC. AND SHALL NOT BE REPRODUCED OR
DISCLOSED IN WHOLE OR IN PART FOR ANY DESIGN OR MANUFACTURE EXCEPT WHEN SUCH USER POSSESSES DIRECT, WRITTEN
AUTHORIZATION FROM NEW CENTURION SOLUTIONS, INC.
12
14. IMPORTANT SAFETY AND HANDLING INFORMATION
WARNING: Failure to follow these safety instructions could result in fire, electric shock,
or other injury, damage to PAS Device or other property.
14.1 Carrying and Handling PAS Device
PAS Device contains sensitive components. Do not drop, disassemble, open, crush, bend
deform, puncture, shred, microwave, incinerate, paint, or insert foreign objects into PAS.
Do not use PAS if it has been damaged – for example, if PAS is cracked, punctured, or
damaged by water.
The front and back covers of PAS are made of durable plastic. The plastic could be
damaged if PAS is dropped on a hard service from a high altitude or receives a substantial
impact or is crushed, bent or deformed. If the plastic is chipped or cracked do not touch or
attempt to remove the broken plastic. Stop using PAS and return it to the Campus Police
Department to receive a new PAS Device. Screen cracked due to misuse or abuse is not
covered under the warranty.
14.2 Keeping the Outside of PAS Device Clean
Clean PAS immediately if it comes into contact with any contaminants that may cause
stains, such as ink dyes, makeup, dirt, food, oils, and lotions. To clean PAS, unplug all
cables from the PAS Device. Then use a soft, lint-free cloth. Avoid getting moisture in
openings. Don’t use window cleaners, household cleaners, aerosol sprays, solvents, alcohol,
ammonia, or abrasives coating. To remove fingerprints, simply wipe these surfaces with a
soft, lint-free cloth. The ability of this coating to repel oil will diminish over time with
normal usage, and rubbing the screen with an abrassive material will further diminish its
effect and will scratch the screen.
In case PAS gets wet, unplug all cables and allow it to dry thoroughly before using it again.
Do not attempt to dry Device with an external heat source, such as a microwave oven or
hair dryer.
14.3 Repairing or Modifying PAS Device
Never attempt to repair or modifyPAS Device yourself. PAS Device does not contain any
user-serviceable parts. Disassembling PAS Device, including the removal of external screws
and back cover, may cause damage that is not covered under the warranty. Service should
only be provided by an Authorized Service Provider. If you have questions, contact New
Centurion Solutions, Inc. For support information, go to: www.newcenturionsolutions.com.
14.4 Battery Replacement
Do not attempt to replace the rechargeable battery in the PAS Device yourself. The battery
may only be replaced by an Authorized Service Provider.
14.5 For Vehicle Equipped with an Air Bag
An air bag inflates with great force. Do not store PAS Device or any of its accessories in the
area over the air bag or in the air bag deployment area.