Installation Manual

OREP Installation Manual 776-91-07-REV-A_OREP_INSTALLATION_MANUAL.docx

THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO NEW CENTURION SOLUTIONS, INC. AND SHALL NOT BE REPRODUCED OR

DISCLOSED IN WHOLE OR IN PART FOR ANY DESIGN OR MANUFACTURE EXCEPT WHEN SUCH USER POSSESSES DIRECT, WRITTEN

AUTHORIZATION FROM NEW CENTURION SOLUTIONS, INC.

Step 12: Take open end Receptacle (G) and strip wire cover to show bare wire.

Attach bare wire to battery (T) White wire to positive side and black wire to

negative side.

Step 13: Place assembled battery (T) inside battery box (S)

Step 14: Set under middle of tripod (J) on mounting base (I)

Complete OREP Assembly