Installation Manual

OREP Installation Manual 776-91-07-REV-A_OREP_INSTALLATION_MANUAL.docx

THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO NEW CENTURION SOLUTIONS, INC. AND SHALL NOT BE REPRODUCED OR

DISCLOSED IN WHOLE OR IN PART FOR ANY DESIGN OR MANUFACTURE EXCEPT WHEN SUCH USER POSSESSES DIRECT, WRITTEN

AUTHORIZATION FROM NEW CENTURION SOLUTIONS, INC.

Step 3: Place Antenna 3db (M) through hole in Antenna Bracket (N) and

secure at base of antenna.

Step 4: Identify the U-Bolt and mast attachment hardware (O). Secure

the antenna-bracket assembly to the mast by sliding a u-bolt through each

hole in the bracket (from previous step) and around the mast. Secure the

u-bolt on the mast with two nuts (included with u-bolt).

Step 5: Place the OREP assembly (A) on the OREP Bracket (P) with the legs facing away. Identify

the Hardware to attach to OREP Bracket (B). Insert four screws into the OREP enclosure holes and

push through the holes in the bracket. Secure the OREP to the bracket by attaching four nuts to

the screws on the backside of the bracket.

Type-A