Installation Manual

OREP Installation Manual 776-91-07-REV-A_OREP_INSTALLATION_MANUAL.docx

THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO NEW CENTURION SOLUTIONS, INC. AND SHALL NOT BE REPRODUCED OR

DISCLOSED IN WHOLE OR IN PART FOR ANY DESIGN OR MANUFACTURE EXCEPT WHEN SUCH USER POSSESSES DIRECT, WRITTEN

AUTHORIZATION FROM NEW CENTURION SOLUTIONS, INC.

Step 8: Take Inmate 23 4#20 Female Panel Receptacle (G) and secure to OREP as shown.

Step 9: Next, place the Solar Bracket (C) approx. 8-10” below the

Repeater Bracket. Make sure the bracket is securely attached with two

U Bolts (D).

Step 10: Now attach the accompanying part of the Solar Bracket

to the part already attached to the mast. Angle it at a 45 degree

angle and secure tightly. Use the pictures above to confirm proper

placement.

Step 11: Now attach the Solar Panel to the bracket. Confirm that the panel is angled properly

and securely fastened. Use the pictures above for reference.