Instructions / Assembly

ASSEMBLY INSTRUCTIONS
B1563-300 GEMINI 5/0 Q PANEL BED-HB/FB/RAILS
NOTE : MUST TIGHTEN SCREWS PERIODCALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
1 OF 2
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts,
which may have come loose inside the carton during shipment. Identify and count all items and compare with
the parts list and/or hardware list shown.
PARTS LIST HARDWARE LIST
No ITEM Qty
A
Headboard
1 pc
B
Footboard(Fixed w/U-Bracket)
1 pc
C
Headboard Leg LSF
1 pc
D
Headboard Leg RSF
1 pc
E
Roll-Out Slats
2 sets
F
Slats Support Leg
4 pcs
G
Side Rail
2 pcs
H
Center Slat
1 pc
I
Headboard Rail
1 pc
No ITEM Qty
1
JCBC M6 x 1 3/16"
4 pcs
2
Flat Washer 1/4"ID x 6/8"OD
Blk
4 pcs
3
ALLEN KEY
M4 x 2 9/16" Blk
1 pc
4
ALLEN KEY
M5 x
2 9/16"
Blk
1 pc
5
Flat Head Chipboard Screw
M4 x 1 2/8" Rbw
32 pcs
6
1206A 4 Hole L Bracket Rbw
2 pcs
7
5072 4 Hole I Bracket (Flat)
Rbw
2 pcs
8
Flat Head Chipboard Screw
M4 x 5/8" Rbw
16 pcs
9
Wood Dowel 10/32" x 13/16"
4 pcs
STEP 1.1 :
Attach Headboard Leg Support (I) to Headboard Leg (C & D) with Wood Dowel (9) and secure with
I-Bracket (7) with Csk Screw (8) and tighten them by using Screw Driver (NOT PROVIDED).
STEP 1.1 :
3
1
2
4x
STEP 1.2 :
5
BACK VIEW
C C
8x
RIGHT
LEFT
C
A
D
STEP 1.2 :
Fix the other holes with Csk Screw (5) as shown.
STEP 1.3 :
I
D
C
9
8
4x
U-Bracket Side Face Down
BACK VIEW
C
I
7
I
C
Arrow Sticker Up
Remark!
I-Bracket Screw
hole with groove
Side face Up
Guide Hole
7
Attach Head Board Leg ( C & D ) to Head Board ( A ) as shown using JCBC BOLT ( 1 ) with
Flat washer (2) and securing with ALLEN KEY ( 3 ) .