Use and Care Manual

8
Cleaning Information:
Wipe off fan blade and front grill with damp washcloth. The fan requires no
maintenance. If the fan squeaks, a drop of lightweight machine oil may be needed
on the fan shaft.
REPLACING THE FUSE
A fuse holder is located on the back of the unit next to the power cord.
To replace or check the fuse:
Remove the fuse holder by pressing on the clip and pulling straight out.
If the fuse is blown:
Replace with the standard replacement fuse. Insert the new fuse into the
fuse holder. Press the assembly straight in until it latches.
120 volt models: Fusing current no more than 2.0 Amp.
CAUTION!
If the fuse holder cap is not installed correctly,
the unit will not operate.