O3/1000 New Comfort 2 Stage AIR CLEANER INSTRUCTION MANUAL CAUTION: Read manual carefully for proper installation and operation.
CONTENTS Specifications ...................................................................................................... 2 Features .............................................................................................................. 3 Introduction ......................................................................................................... 3 Applications ......................................................................................................... 4 Installation ...
Ion Output: • 20 KV negative ion generator. Filtration Type: • No Filters with this model. New Comfort makes several models with Filters if needed. Warranty: • 3-Year Factory Warranty. To reduce the risk of electric shock, this equipment has a grounding type plug that has a third (grounding) pin. This plug will only fit into a grounding type power outlet. If the plug does not fit into the outlet, contact qualified personnel to install the proper outlet. Do not alter the plug in any way.
• Low Maintenance • Low Electrical Usage • Complete User Control No Residual Contamination APPLICATIONS • Home, Office, Restaurant, Hotel • Smoking Areas • Production Areas • Basements • Casinos & Large Meeting Halls • Veterinary Hospital Barns, Kennels & Stables Photo Labs & Salons • Day Care Centers Chemical Odors Bowling Alleys & Parlor INSTALLATION 1. Remove unit from shipping carton. 2. Remove all protective materials. 3.
Installing Ozone Plates: Step 1: Make sure the unit is unplugged before installing or removing any Ozone plates or maintaining the unit in any way to prevent electric shock. Step 2: Remove the two Ozone plates from separate cardboard box . Step 3: Turn unit so you are looking at back of unit (like picture above). Step 4: Insert the 2 Ozone plates by pushing through the 2 metal slots above until a snug fit is acquired. For maximum performance, Ozone plates may need to be washed in warm water.
Suggested locations, listed in order of preference: • Nearest to the source of the worst pollutant. • Near cold-air return in an air circulation system. In the area most frequently used location to achieve maximum benefit. Notes: • For maximum control, the unit should be placed where easy access to the control panel is possible. • The rear of the unit should always have at least six inches of open area to allow unrestricted airflow.
2. Ozone Control • The Ozone control can turn on or off the Ozone. • To reduce the level of Ozone, user may also remove one of the Ozone plates. • To reduce mold, mildew, and bacteria, turn the unit on the highest setting for 3-4 hours. Open doors and windows to allow air to circulate out of the room before returning to occupy the room. • This model does not come with any indicator lights. User may determine Ozone is running when Ozone knob is turned on.
Cleaning Information: Wipe off fan blade and front grill with damp washcloth. The fan requires no maintenance. If the fan squeaks, a drop of lightweight machine oil may be needed on the fan shaft. REPLACING THE FUSE A fuse holder is located on the back of the unit next to the power cord. To replace or check the fuse: • Remove the fuse holder by pressing on the clip and pulling straight out. If the fuse is blown: • Replace with the standard replacement fuse. Insert the new fuse into the fuse holder.
TROUBLESHOOTING GUIDE Indicators of Operation: Ozone switch to be operated when the room is unoccupied. Open the door and window when you return to the room if Ozone operated for several hours. After the Ozone is turned off allow one hour of open window circulation before returning to the room for full occupation. Troubleshooting – What to look for first: 1. I have plugged in the unit, turned the power switch to "On" and nothing is happening.
4. What are the most typical application problems? Problem: Lack of air movement, improper placement of the unit. Warning Sign: Strong odors still remain in the environment after placement. 5. Unit does not operate: • Is the unit plugged in? • Is the power cord fully inserted into the back of the unit? • Are you sure the outlet is functioning normally? • Is the unit turned on? Is the back grill installed properly to depress the safety switch forward? 6.
