Instructions / Assembly

3 in (7.6 cm)
3
Base Molding Instructions
3
On the Bottom Trims, there is a notch alongside the inside face.
this is designed to clear screw heads during installation:
Typically your post would be fastened to a wooden post as shown.
The base molding then can slide down and clear the screw heads.
To make sure the base molding clears the screw heads, the screws
fastening the post to the wooden post should be well within a 1½ in
(4 cm) radius of the center of the post.
1
2
STEPS
1 2 3
Screws fastening the vinyl post
to the wooden post.
Section view showing the notches in the bottom trim
clearning the screw heads.
Wooden Post
Base Molding Vinyl Extrusion
Screw head
Notches
Notch
Vinyl Post