Manual

Check Box for These Contents

In the event of missing or defective parts please call our customer service dept. at

1 800 282 9346, ext #20

(Mon. to Fri. 8:00 AM to 4:00 PM EST).

1. Post Cap (6)

2. Short Rail (12)

3. Post (6)

Long Rail (16)

5. 4” Stainless Steel Screws (64)

General Information

• Read Instructions through carefully before beginning assembly.

• When assembling components, place on a non-abrasive surface

(i.e. shipping box) to avoid scratching.

• We recommend an area approx 4’x 8’ for unobstructed assembling.

• You should not need to use excessive force when assembling components.

10’ Pergola Garden Bed

Please read through before starting assembly.

ASSEMBLY INSTRUCTIONS

Ver 1.0/NOV 2013

www.newenglandarbors.com

Not to Scale

PAGE 1
A S S E M B LY I N S T R U C T I O N S 10’ Pergola Garden Bed www.newenglandarbors.com Please read through before starting assembly. Check Box for These Contents In the event of missing or defective parts please call our customer service dept. at 1 800 282 9346, ext #20 (Mon. to Fri. 8:00 AM to 4:00 PM EST). 1. 2. 3. 4. 5.
PAGE 2
STEP ONE 1 Assemble the Long Wall 1 Take two posts and slide four long rails between the two openings as shown. 2 Using the screws provided, fasten the rails to the posts. 3 Fasten another section of post and four long rails as shown. 4 Repeat steps one through three for a second long wall. 2 3 x2 STEP T WO Assemble the Garden Bed 1 Slide 12 short rails between the two pre-assembled sections from the previous step as shown. 2 10’ Pergola Garden Bed www.newenglandarbors.
PAGE 3
STEP T WO 2 2 Fasten the 12 short boards with the screws provided (32 total). 3 Pressure fit the post cap into place as shown. 3 Note: The 10’ Pergola Garden Bed is designed to fit between the two posts of the 10’x10’ pergola (sold separately) as shown. www.newenglandarbors.com 3605 32nd St., Building 3, Port Huron MI USA 48060 Toll Free Phone: 1 800 282 9346 Toll Free Fax: 1 877 464 9286 www.newenglandarbors.