User guide

Check Box for These Contents

In the event of missing or defective parts please call our customer service dept. at

1 800 282 9346, ext #20

(Mon. to Fri. 8:00 AM to 4:00 PM EST).

1. Solar Keystone Top Lid (1)

2. Battery Pack (1)

3. Solar Keystone Body (with Lens) (1)

4. 5/8” Stainless Steel Screws (2)

Tools You Will Need

• Phillips-head Screwdriver

• Flat-head Screwdriver

• Stool or Short Ladder

General Information

• Read Instructions through carefully before beginning

assembly.

• You should not need to use excessive force when assembling

components.

• The Solar Light Keystone is designed to retroactively fit over

your current arbor such as the Livingston Arbor, Vienna Arbor,

Florence Arbor, Monaco Arbor, Frederickton Arbor, and Stockport

Arbor, as well as the Vienna Trellis.

• If this solar keystone is to be installed on a new arbor, do not attach

the keystone lid during assembly as per step 3 on the next page.

The Solar Light Keystone

Please read through before starting assembly.

ASSEMBLY INSTRUCTIONS

www.edenarbors.com

MARCH 2012

PAGE 1
A S S E M B LY I N S T R U C T I O N S The Solar Light Keystone www.edenarbors.com Please read through before starting assembly. Check Box for These Contents In the event of missing or defective parts please call our customer service dept. at 1 800 282 9346, ext #20 (Mon. to Fri. 8:00 AM to 4:00 PM EST). 1. 2. 3. 4.
PAGE 2
STEPS 1 www.edenarbors.com 1 Remove the two screws holding the solar keystone lid to the body using a phillips head screwdriver and retain them to be used again later on. 2 Connect the battery pack on the underside of the solar keystone lid as shown. 3 Remove the existing keystone lid (only) on the desired keystone. Use a flat-head screw driver to gently pry the lid off the keystone body as shown. 4 2 Align and slide the solar light keystone lid and body to the existing keystone as shown.
PAGE 3
N OT E S O N S O L A R L I G H T www.edenarbors.com Solar Light Location It is important to mount your solar lamp post in a spot where it will receive maximum sunlight throughout the day. Shadows cast by your home, trees, vines and other structures will effect the amount of sunlight received, so please consider this before deciding on a location. Operations Your solar light is programmed to turn on automatically at night.