Instructions / Assembly

Louver Assembly
Place twelve Steel Holder Brackets as shown below and care-
fully lower the Louver assembly onto the steel brackets.
Do not screw the Steel Holder Brackets in place at this point.
5
Fasten the Short Louver Bar using two nuts as shown.
Do not over tighten.
You will need to raise the middle section momentarily
to do this step.
6
6
Note: check that the holes are
closer to the bottom as shown.
Install in order (one row at a time)
19
12 x 24 Flat Top Louvered Pergola
www.newenglandarbors.com
www.newenglandarbors.co.uk
Steel Holder Brackets