User Manual

Check Box for These Contents

In the event of missing or defective parts please call our customer service dept. at

1 800 282 9346

(Mon. to Fri. 8:00 AM to 4:00 PM EST).

1. Pre-Assembled Side Wall Panels (2)

2. Post Caps (4)

3. Floor Panels (2)

Pre-Assembled Front & Back Wall Panels with Posts Connected

(2)

5. 1 1/2” Self-Auguring Stainless Steel Screws (16)

Tools You Will Need

• Cordless Drill

• Hammer

General Information

• Read Instructions through carefully before beginning assembly.

• When assembling components, place on a non-abrasive surface

(i.e. shipping box) to avoid scratching.

• We recommend an area approx 4’x 8’ for unobstructed assembling.

• You should not need to use excessive force when assembling components.

The Barcelona Planter Box

Please read through before starting assembly.

ASSEMBLY INSTRUCTIONS

Not to Scale

21.76

STEP ONE

Layout front wall panel on the work surface.

Insert the side walls into the routed holes on the front wall

panel posts.

Connect the Front & Back Wall

to the Side Wall Panels

V1.1/101815

www.newenglandarbors.com

PAGE 1
A S S E M B LY I N S T R U C T I O N S www.newenglandarbors.com The Barcelona Planter Box 21.76 1 20 17 27 21 Please read through before starting assembly. Check Box for These Contents In the event of missing or defective parts please call our customer service dept. at 1 800 282 9346 (Mon. to Fri. 8:00 AM to 4:00 PM EST). 1. 2. 3. 4. 5.
PAGE 2
The Barcelona Planter Box 3 Fit the opposite back wall panel over the side walls. 4 Reposition the assembled planter box so it stands upright on the work surface. Ensure at this point the planter walls are square to each other. This can be accomplished by making sure that the corner to opposite corner measurement both ways are equal. 3 4 5 6 5 Using the screws provided, secure the side wall panels into the front and back wall panels with 2 screws at the ends of the rails.