Instruction Manual

8
Ș Drill five 8 mm diameter holes to a depth of 50 mm for the
attachments and press in the wall plugs flush with the wall.
Installation
Ș Screw on the fixing bracket for the flue duct.
Ș Screw on brackets for the extractor hood hand-tight. Do not firmly tighten
the screws.
Installing your Cooker Hood
Bringing it all together
Mounting Instructions
Preparing the installation Caution!
Ensure that there are no electric wires, gas or water pipes in
the area where holes are to be made.
● Mark a vertical centre line on the wall from the ceiling to the lower edge of the
extractor hood.
● Mark positions for the screws and the contour of the attachment