Instruction Manual

Installing your Cooker Hood
Bringing it all together
For the various installations use screws and screw anchors suited to the
type of wall (e.g. reinforced concrete, plasterboard, etc.). If the screws and
screw anchors are provided with the product, kindly check the screws are
suitable for the type of wall in which the hood is to be fixed.
Fixing the Telescopic Flue
Arrange the electrical power supply within the dimensions of the
decorative flue. If your appliance is to be installed in the ducting version or
in the version with external motor, prepare the air exhaust opening. Adjust
the width of the support bracket of the upper flue. Then fix it to the ceiling
using the screws make sure that it is in line with your hood and respecting
the distance from the ceiling. Connect the flange to the air exhaust hole
using a connection pipe.
To transform the hood from a ducting version into a filtering version, ask
the product support
department for the charcoal filters and please follow the installation
instructions.
This cooker hood can be used without access to outside filtration. A
charcoal filter (not supplied) can be fitted to recirculate the extraction.