Instruction manual Washing Machine NWDHT914DG NWDHT914W
You’ll soon be enjoying your new washing machine. It all begins here, with your instructions. Don’t worry, there’s nothing too technical coming up. Just simple, step-by-step guidance to get you up and running quickly. Sound good? Then let’s get started. Help and Guidance We’re here to help you get the most from your . Should you require any guidance, a simple solution can often be found online at: www.newworldassist.co.
Contents 1 7 Safety information Safety information 2 3 4 6 Troubleshooting 34-35 Error Signals 36 Getting to know your washing machine Technical Specifications 37 Help and assistance 38 Ready? Let’s begin 10 Disposal 39 Accessories 12 Guarantee 40 Installing your washing machine Installation requirements 14 Unpacking 14 Connections (electrical, water, gas) 15 Functions Functions 5 6 Product support 18 Using your washing machine First use of 26 Standar
Safety information 1
Safety information Important - Please read these instructions fully before installing or operating your washing machine • Dispose of all packaging carefully and responsibly. Before use • If the supply cord is damaged, it must be replaced by the manufacturer, their service agent or similarly qualified persons in order to avoid a hazard. • The new hose-set supplied with the appliance are to be used and that old hose-set should not be reused.
Safety information Important - Please read these instructions fully before installing or operating your washing machine During use or the Customer Helpline: 0333 3052263. • Do not use a multiple socket or extension cord. • Do not use if the power lead is damaged. It must be replaced by the manufacturer, their approved service agent or similarly qualified person. Customer Helpline: 0333 3052263. • Do not insert the plug into the power supply with wet hands.
Getting to know your washing machine 2
Getting to know your washing machine You’ll be up and running in no time Ready? Let’s begin... Please read these instructions carefully. They contain important information which will help you get the best from your washing machine and ensure safe and correct installation and operation. If you require any further assistance, our technical experts are happy to help. For full details, refer to the product support section at the end of these instructions.
Getting to know your washing machine You’ll be up and running in no time 2 3 4 8 9 1 10 7 7 7 7 5 6 Front Back 1. Detergent drawer 7. Packing bolt x 4 2. Top panel 8. Power lead 3. Programme knob 9. Drain hose 4. Start/Pause button 10. Water inlet 5. Door 6. Filter If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions, or online at www.
Getting to know your washing machine You’ll be up and running in no time Model Capacity Spin Speed Energy class NWDHT1014W 9kg 1400rpm A+++ NWDHT1014DG 9kg 1400rpm A+++ Accessories This machine includes the below accessories, please install these parts before operating.
Installing your washing machine 3
Installing your washing machine Bringing it all together Unpacking your washing machine Adjusting the feet Caution: 2 people are required to unpack the washing machine, it is recommended that gloves are worn. a: For your machine to work efficiently with minimum vibration it should be settled on flat, non-slippery, firm ground. a: Carefully remove all packaging materials including the foam base, dispose of correctly. Note: When opened, water droplets may be visible in the drum etc.
Installing your washing machine Bringing it all together Connections Electrical Water inlet hose connections Important: This washing machine MUST only be connected to a cold water supply. a: Connect the water inlet hose, the angled connection attaches to the water inlet on the back of the washing machine. (7) b: The straight connection attaches to the water supply valve. (8) Any electrical work that is required to install this washing machine MUST be carried out by a qualified electrician.
Installing your washing machine Bringing it all together Plug replacement (UK & Ireland only) Should you need to replace the plug; the wires in the power cable are coloured in the following way: Blue – Neutral ‘N’ Brown – Live ‘L’ Green & Yellow – Earth ‘E’ The green & yellow wire must be connected to the terminal in the plug that is marked with the letter E or by the earth symbol. The blue wire must be connected to the terminal that is marked with the letter N.
Functions 4
Functions Simple everyday use Programme selection knob For you to select different washing programme. Temperature Spin Speed Delay Timer Selection Auxiliary functions setting Press the button repeatedly to set the Extra Rinse. Temperature, speed and so on.
Functions Simple everyday use WASHING SEQUENCE 1-Temperature Selection • Plug your machine into the mains power supply. • Open the water tap. • Open the washing machine door. • Load your items of clothing into the drum, ensuring they are loosely packed. • Push the door of your machine until you hear the locking sound to close it. Auxiliary function button 1 Selecting programme Select the programme appropriate for your laundry from the programme table (Page-22).
Functions Simple everyday use 2- Spin Speed Selection 3- Delay Timer You can adjust the spin speed of your laundry with the spin speed setting button. To adjust the spin speed between the maximum spin speed and the cancel spinning option (- - -), press the Spin speed button until the desired speed is displayed. If you have skipped the spin speed you want to set, keep pressing the spin speed adjustment button until the desired spin speed is displayed again.
Functions Simple everyday use Start/Pause button By pressing on the Start/Pause button, you may start the programme you have selected or suspend a running programme. If you switch your machine to the standby mode, the Start/Pause led on the electronic display will blink If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions, or online at www.newworldassist.co.
Functions Simple everyday use Child Lock Finishing Programme The Child Lock function allows you to lock the buttons so that the wash cycle you have chosen cannot be changed unintentionally. Your machine will stop by itself as soon as the programme you have selected finishes. - “End” led will blink on the display panel. To activate child lock, press and hold buttons 2 and 3 simultaneously for at least 3 seconds. ‘’CL’’ will flash on the electronic display for 2 seconds when the child lock is activated.
Functions Simple everyday use Programme Selection Guide Programme Washing temperature (°c) Prog. Time (mins) NWDHT914DG Detergent compart. NWDHT914W /Max load Type of laundry capacity (kg) NWDHT914DG NWDHT914W Cotton(**) *60 - 90 80 - 70 230 2 9,0 Very dirty, cotton and flax textiles. (Underwear, linen, Tablecloths, towel (maximum 4,5 kg), bedclothes, etc.) Cotton (**) *40 - 30 “- -C” 222 2 9,0 Dirty cotton and flax textiles.
Programme Selection Guide NOTE: PROGRAMME DURATION MAY CHANGE ACCORDING TO THE AMOUNT OF LAUNDRY, TAP WATER, AMBIENT TEMPERATURE AND SELECTED ADDITIONAL FUNCTIONS. (*) Washing water temperature of the programme is the factory default. (**) 60 C° - 40 C° are energy label declaration programmes. Due to the short washing time of this programme, we recommend that less detergent is used. The programme may last longer than 15 minutes if your machine detects an uneven load.
Using your washing machine 5
Using your washing machine Getting the most from your appliance • Your laundry has product labels on them that specifiy their specifications. Wash or dry your laundry according to the specifciations on the product label. • Separate your laundry according to their types (cotton, synthetic, sensitive, wool etc.), their temperatures (cold, 30°, 40°, 60°, 90°) and degree of contamination (slightly stained, stained, highly stained). • Never wash your coloured and white laundry together.
Using your washing machine Getting the most from your appliance Liquid Detergent Apparatus Main wash detergent compartment Softener Compartment Pre-wash detergent compartment • Use detergents produced for automatic washing machine in your machine. The amount of detergent you will use for your laundry is printed on the detergent package. • The higher the degree of hardness of the water the more detergent you will use.
Using your washing machine Getting the most from your appliance Quick start 8. Press the ( start/pause ) 1. Open the door and Load the laundry 7. Select the desired programme 2. Measure out the detergent 5. Plug the power supply 3. Close the door 4. Turn on the water tap If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions, or online at www.newworldassist.co.
Care and maintenance 6
Care and maintenance Looking after your appliance Before cleaning your washing machine. a: Unplug your machine from the mains power supply. b: Close the water tap. • While closing the pump cover, ensure that the parts on the inner side of the cover match the holes on the front panel side. (5-A) • You can reattach the pump cover in the reverse order that you removed it.
Care and maintenance Looking after your appliance Detergent drawer Detergents may form sediments in your detergent drawer or in the housing of the detergent drawer over time. To clean the sediment, pull out the detergent drawer from time to time. To pull out the detergent drawer: Note: After each wash leave the door of the machine open to help air the drawer and reduce any mould build up; 1 • Pull the detergent drawer to the end.
Care and maintenance Looking after your appliance Drum Do not leave metallic objects such as needles, paper clips, coins etc. in your machine. These objects lead to stains in the drum. To clean such rust stains, use a non-chlorine cleaning agent and follow the instructions of manufacturers of the cleaning agent. Never use wire wool or similar hard objects for cleaning rust stains.
Product support 7
Product support Help is always at hand All repairs to the machine must be carried out by an authorised repair agent. When a repair is required or you are unable to eliminate the failure with the help of the information below: a: Unplug the machine. b: Close the water tap. c: Contact the nearest authorised repair agent. FAILURE Your machine does not operate. Your machine does not receive water. PROBABLE CAUSE It is unplugged. Insert the plug into the socket. Your fuse is defective. Change your fuse.
Product support Help is always at hand FAILURE Excessive foam in the detergent drawer. The washing result is poor. The washing result is not good. PROBABLE CAUSE Too much detergent has been used. METHODS OF ELIMINATION Press the start/pause button.In order to stop the foam, dilute one table-spoon of softener in half liter of water and pour it in the detergent drawer. Press the start/pause button after 5-10 minutes. Arrange the amount of the detergent properly in the next washing process.
Product support Help is always at hand Error Signals Your machine is equipped with systems which will take the necessary precautions and warn you in case of any. IMPORTANT: IT CAN TAKE UPTO 10 MINUTES FOR ERROR TO REGISTER. Failure code Probable failure Process to be followed The door is not shut properly. Shut the door properly so that you hear the click. If the problem persists, turn off the machine unplug and contact the nearest authorised service agent immediately.
Product support Help is always at hand Technical Specifications Model / Item NWDHT914DG NWDHT914W Power supply (220-240) V ~/50Hz (220-240) V ~/50Hz Max working current 10 amp 10 amp Water pressure Maximum : 1Mpa Minumum : 0.01 MPa Maximum : 1Mpa Minumum : 0.
Product support Help is always at hand Help and assistance If you require any technical guidance or find that your washing machine is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions or online at www.newworldassist.co.uk If you still require further assistance, call one of our experts on 0333 3052263*.
Product support Help is always at hand Notes on disposal : The symbol on the product or its packaging indicates that this product may not be treated as household waste. Instead it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Product support Help is always at hand Call us now and activate your 24 month guarantee Thank you for choosing Newworld. Your new product is guaranteed against faults and breakdowns for 24 months. Don’t forget to register it with us today so we can provide you with our best possible after-sales service and useful updates. www.newworldassist.co.uk 0333 305 2263 Your New World Guarantee This product is guaranteed for 24 months from the date of original purchase.
Contact: www.newworldassist.co.