Installation Guide

Fastening Cabinets
Note:
All drawers must be removed prior
to fastening cabinets together.
Align bolts, tighten lightly.
Level cabinets and tighten all bolts.
X4
1
2
X8
Remove plastic caps from cabinets.
3
4
Parts Needed.
4 X Lock washer
(1/4”)
4 X Lock nut
(1/4”)
4 X
Washer
(1/4”)
4 X Hex Bolt
(.25” x 5/8”)
Installing Worktop
Side Support Bracket
Note: Support Bracket Sold Separately
A support bracket is to be used if the worktop is
added to the set without a secondary supporting
base/tool cabinet.
X3
Fasten nuts, bolts, and lock washers.
2
Tighten nuts & bolts.
Parts Needed.
4
3
5
Align bracket.
Level bracket and ensure it is at the
same height as the base cabinet.
1
Open locker and locate slots on either side.
3 X Lock washer
(1/4”)
3 X Lock Nut
(1/4”)
3 X
Washer
(1/4”)
3 X Hex Bolt
(.25” x 5/8”)