Installation Guide

Mounting Cabinets (Drywall/Studded Wall)
1
Level cabinet
Gather parts.
2
Align cabinet
to stud marks.
• Follow steps 1 to 5.
• Drill 4 pilot holes through the
perforated strip with hammer drill &
masonry bit.
• Use 4 x (
2 ¼” x ¼” )Tapcon Concrete
Anchor into wall. (Not Included)
• OR 4 x (#10 x 2” )Screw with 3/16”
masonry plug into wall. (Not Included)
• Follow Step 6.
Use stud nder to locate the studs
and mark the wall with a pencil.
4
3
Wall Screw
(1/4” x 2.5”)
Wall Washer
(1/4”)
5
Place cabinet tight
against the wall.
X4
6
Masonry.
Drill 4 wall screws and washers
through perforated holes into studs.
Fastening Cabinets
(Optional)
Note:
Fasten additional cabinets to
initial securely mounted cabinet.
1
Align bolts, tighten lightly.
Level cabinets and tighten all bolts.
2
X2
Wall & Locker: 4 wall screws and 4 washers
Base & Tool Cabinet: 2 wall Screws and 2 washers
Parts Needed.
4 X Lock washer
(1/4”)
4 X Lock Nut
(1/4”)
4 X
Washer
(1/4”)
4 X Hex Bolt
(.25” x 5/8”)
X2