Instructions / Assembly

10
Install both short perimeter beams into
the bottom of the vertical angle posts. Use
a rubber mallet to align the rivet nubs with
the bottom of the keyholes.
Install both long cross beam assemblies
into the bottom of the vertical angle posts.
use a Rubber mallet to align the rivet nubs
with the bottom of the keyholes.
Bolt together Long Perimeter Beams A and B at the desired 6’ or 8’ (72” or 96”) length assembly.
Use four 1/4” x 3/4” bolts and 1/4” lock nuts with eight 1/4” washers per assembly.
8’ Assembly
Note:
To reduce sag, tighten the bolts on the
top of the beams rst followed by the
bolts on the front of the beams.
Assemble and Install Perimeter Beams
6’ Assembly
14
15 16
1
st
1
st
2
nd
2
nd