Instructions / Assembly

3
50 lbs. 50 lbs.
500 lbs.
50 lbs.
550 lbs.
600 lbs.
Weight Capacity
SAFETY WARNING
PLEASE READ THIS FIRST
1. All VersaRac units have a rated load capacity of 600 pounds,
evenly distributed, using 3” lag bolt anchored into solid
wood joists or supports capable of supporting such a load.
2. Each VersaRac utility hook can hold a maximum of
50lbs, Weight of utility hook storage must be included in
maximum load of 600lbs for the overhead rack.
3. Do not load more than 600lbs on to a VersaRac. Live loads
(people, pets, etc) may weigh less than the rated weight
capacity, however will exert force on the rack beyond its
rated capacity. As such, do not stand, jump or hang from
your VersaRac.
4. VersaRac units must be installed into structurally sound
overhead joists or supports. NewAge Products Inc. makes no
claim to the capacity or strength of the structure to which
the units are mounted.
5. NewAge Products Inc. can not be held liable for structure
failure, or damage or injury resulting from structure
failure.
6. Always inspect the structure of the ceiling to ensure there
is suitable supports. Never install more than one VersaRac
unit on any two overhead supports.
7. VersaRac is designed for installation into wooden ceiling
joists. Do not attempt mounting to steel beams.
8. Ensure all weight is distributed evenly on the rack. Place
heavier objects near the vertical angle posts, and lighter
objects in the center.
9. Do not jump or climb on your VersaRac.
11. Routinely inspect your system to ensure all components
are fastened securely.