Instructions / Assembly

9
Determine desired height of VersaRac from
Ceiling to bottom of the overhead rack.
18”
or
27- 42“
If desired height is greater than 18”,
Bolt an 18” vertical angle post to a 27” post with
two 1/4” x 3/4” bolts, two 1/4” lock nuts and four
1/4” washers. Use one bolt on each side of the
post with keyholes in the same direction.
Repeat for the remaining vertical angle posts.
Note: Storage space will be 3” shorter than the full height
of the VersaRac
3”
Bolt vertical angle posts to ceiling angle brackets with the large end of the keyslot on top
using a 1/4” x 3/4” bolt, a 1/4” lock nut and two 1/4” washers for each post. Vertical angle
posts should be orientated so that they form the corners of the VersaRac.
Note:
Vertical Angle Post on the left will be installed on opposite sides of the ceiling angle brackets from the right.
Left Side Right Side
Install Vertical Angle Posts
Minimum
3”
Overlap
11 12
13