Full Product Manual

15
Using 1/4” drill socket or 1/4” wrench securely tighten lock
nuts to each wall bracket from inside cabinet .
WALL STUD
LOCKER
Hanging Cabinets on Slatwall
1
Attach braket to slatwall at desired
height. For Locker cabinet attach
second bracket 65” below rst bracket.
Align bolt with slots on back of cabinet
and hang cabinet .
2
Insert bolts through slatwall bracket.
Parts Needed.
3
Wall Washer
(1/4”)
Lock Nut
(1/4”)
Slatwall Bracket
4
Note:
Slatwall Brackets for use with standard 3” slatwall Sold Separately. Check with your slatwall supplier to
determine the rated capacity of your slatwall. DO NOT OVERLOAD.
WALL CABINET
BASE CABINETS
3 X Hex Bolt
(1/4” x 5/8”)