How to Guide

Using two M5 Phillips bolts, screw the Light Valance into the Wall Shelf hex rivet. Repeat

for all remaning Light Valances.

Parts Needed:

Drill a pilot hole using a 3/16” drill bit. Using a 1/4” x 2-1/2” lag bolt, one 1/4” ID Fender

Washer and a 7/16” socket, bolt the Wall Shelf into the Stud. Repeat for remaning studs and

second shelf.

To install the Top Shelf upside down, ip the shelf to where the top of the shelf is now facing

down. Insert the 1/4” Hex bolt and washer through the bottom mounting holes and tighten

with a lock nut inside the cabinet. Continue steps 3-5 to complete installation.

Fender Washer

(1/2” OD)

7/16” Socket

Lag Bolt (1/4”dia x 3”)

Lag Screw

(1/4” dia x 2-1/2”)

7/16” socket

M5 Bolt

(M5 x 12mm)

Parts Needed:

Installation Tips

Note:

The Top Shelf is capable of being installed upside down if desired.

Lock Nut

(1/4”)

Washer

(1/4” ID)

Hex Bolt

(1/4” dia x 5/8”)

Parts Needed:

Light Valance