Instructions / Assembly

INSTALL INSTRUCTIONS
NEWAGE STEEL WELDED PERFORMANCE CABINETRY
TOOLS AND PARTS REQUIRED:
Gather the required tools and parts before starting installation.
TOOLS NEEDED:
• 7/16” wrench
• 7/16” socket driver wrench
• Adjustable wrench or pliers
• 12” Magnetic Level
• #2 Philips Bit
• Cordless Power Drill with 7/16” socket attachment
• Tape Measure
• Stud Finder
• Pencil
• Hammer Drill with Masonry Bit (optional)
WARNING:
EXCESSIVE WEIGHT HAZARD
• Use two or more people to move, assemble or install cabinet
or locker, failure to do so can result in back or other injury.
UNPACKING OF THE CABINETS:
• Begin by placing the cabinet on a sound level surface.
• Remove all cardboard and foam packaging material.
• Remove clear plastic bag.
• Dispose / recycle all packaging materials.
• Remove and verify all the contents in the box. See “Parts and
Hardware Supplied List”
NOTE: Grey Caps on Sides of Base Cabinets
If you are installing cabinets beside each other, the grey caps on
the sides of the base cabinets must be removed in order to allow
the cabinets to sit flush beside each other, without any gaps. The
caps can be popped out by hand or with a flat screwdriver head
or pliers.
PARTS AND HARDWARE SUPPLIED WITH CABINETS:
Parts
Height-Adjustable Steel Leveling Legs
Threaded Adjustable Leveler
Nameplate
5/8” L x ¼” W Zinc Plated Hex Bolt (7/16” Hex Head
all SAE Standard Threads)
1/4” - 20 Hex Lock Nuts (7 / 16” Hex Head)
Small Lock Washers
#8 x 5/8” Wood Screw, Round Head with Washer,
Deep Thread, with Speedpoint
Keys
Full Width Adjustable Shelves
Worktop Support Bracket (sold separately)
2.5” L X ¼” W Cabinet Mounting Lag Bolts
(7/16” Hex Head)
Large Mounting Fender Washers
(1 ¼” Diameter with ¼” hole in the middle)
1-Drawer,
2-Door
Base
Cabinet
Tool
Drawer
Locker Wall
Cabinet
2-Door
Base
Cabinet
4 4 4 4 0
4 4 4 4 0
20 20 20 20 4
4 4 4 3 0
2 2 2 2 2
0 0 0 3 0
0 0 0 0 0
2
2
2
2
2
2
4
7
4
4
1 1 1 1 1
20 20 20 20 4
4 4 4 4 4
WARNING:
DO NOT OVERLOAD CABINETS! CABINETS ARE DESIGNED TO
CARRY THE FOLLOWING MAXIMUM WEIGHT CAPACITIES:
Cabinet Shelf Weight
Capacity (lbs)
Drawer Weight
Capacity (lbs)
Bottom Weight
Capacity (lbs)
Top Weight
Capacity (lbs)
Overall Weight
Capacity (lbs)
Locker 150 - 200 150 800
Wall - - 100 - 100
2 Door Base 200 - 200 200 600
Tool Drawer - 100 - 200 500
1 Drawer, 2
Door Base
200 100 200 200 700
need more information? try, WWW.NEWAGEPRODUCTS.COM or 1 877 306 8930 or for U.K 0800 031 4069 for answers to commonly asKed qUestions.