How to Guide

21
2ft Cross Support Assembly
19
Grid Supports & Wire Grids Installation
20
i
ii
(i) Assemble the 2ft Cross Supports (#5) with one 1/4” hex bolt (#6) and 1/4” lock nut (#7). (ii)Attach
the assembled 2ft cross supports to the perimeter frame with four hex bolts (#6), eight washers
(#8), and four lock nuts (#7)
(i) Begin at the side ends of the Wall Mounted Shelves and slide the 2ft Finishing Grid Section with
bent edges (#9) . The bent edges would slide below the installed Pulley & Cables. (ii) Place 2ft “U”
Shaped Grid Supports under wire grid (#10).
ii
i