Full Product Manual

9
www.newageproducts.com
Mounting the Worktop
1
X2
X2
X2
Place worktop on cabinet. Locate (6 )
punch holes on inside of cabinet.
Pre-drill 3mm (1/8”) pilot holes in
worktop.
Align worktop to the front, the back
or leave a 1in overhang on the front
and back
Re-insert the 2 top drawers.
2
Drill into the worktop using the #8 x
5/8” wood screws.
Parts needed.
Remove the top 2 drawers and open
the doors. See page 8.
3
4
5
6 x Wood
Screw
(#8 x 5/8”)
Note: Please Ensure that casters are
locked in place before installing the
worktop
1 x Cordless
Power Drill
1 x #2 Phillips
Bit
Side View
Option 1 Option 2