How to Guide

Connecting Wall Mounted Shelves Horizontally

Install rst wall shelf according to

option A (Wall Mounted) or B (Ceiling

Mounted), until reaching Step 12 on

page 16 or page 18.

Note: Only one cable assembly is required for each pair of side perimeter beams.

Attach Side Beams by guiding the

mounting holes into the carriage bolts and

shoulder rivets on the wall bracket. Then

bolt the side perimeter beams with a 1/4”

washer and 1/4” acorn nut.

Once the connecting side beams have

been installed, continue installation with

step 17 on page 20.

Insert a 5/16” Hex Bolt into the Front/First hole of the side perimeter beams. Slide Pully cable cap

onto the Hex Bolt and wrap the Cable Assembly around the pulley. Slide the Pulley Cable Cap onto

the Hex Bolt and secure with a 5/16” lock nut. Align tab on Pulley Cable Cap with cutout in side

frame.

Note: Before installing the Wall

Mounting Brackets, ensure wall

mounted bracket will be shared

between two shelves that both carriage

bolts are mounted where there will be

two Wall Mounted Shelves connected.