Installation Guide

20
WALL STUD
LOCKER
X4
Securing to Wall
Using (4) 1/4” x 2.5” lag screws and washers secure
each cabinet to wall stud from inside cabinet.
Parts Needed.
Bolt
(1/4” x 2.5”)
Wall Washer
(1/4”)
7
Note: Brackets are not designed to support the weight of a loaded cabinet. Cabinets
must be secured to the wall using supplied 1/4” x 2.5” lag screws.
Note: Slatwall Brackets for use with standard 3” slatwall Sold Separately. Check with your
slatwall supplier to determine the rated capacity of your slatwall. DO NOT OVERLOAD.
Hanging Cabinets on Slatwall
1
Insert bolts through slatwall bracket.
Parts Needed.
Wall Bolt
(1/4” x 5/8”)
Wall Washer
(1/4”)
Slatwall Bracket
Lock Nut
(1/4”)