How to Guide

15
Installing Pad Eye Plate
Option A: Wall Conguration
9A
10A 11A
Wall Mounted:
35”
Wall Mounted:
26”
Drill pilot holes into the solid wood using
a 3/16” drill bit.
Secure Pad Eye Plate (#22) to the
stud or joist using two 3” Lag Screws
(#15), and a 7/16” socket.
Wall Mounting: Measure and mark 26” vertically from the bottom of the Wall Mounted bracket
(#12) to the top of the pad eye plate (#22) . Align the pad eye plate on the center of the stud
and the top of the eye plate below the level line and mark the wall for pilot holes.
26”
Side View
Front View
#12
#22
Wood
Stud
Warning:
Must bore into
3 inches of solid
wood for lag screw
(#15) to be fully
secured.
Side View