Installation Guide

18
Fastening Cabinets on StuddedWall
Level cabinet
Gather parts.
1 2
Align cabinet
to stud marks.
Use stud finder to locate the studs
and mark the wall with a pencil.
4
3
Wall Screw
(1/4”x 2.5”)
Wall Washer
(1/4”)
5
Place cabinet tight
against the wall.
X4
6
Masonry.
• Follow steps 1 to 6.
• Drill 4 pilot holes through the
perforated strip with hammer
drill & masonry bit.
• Use 4 x (2 ¼” x ¼” )Tapcon
Concrete Anchor into wall.
• OR 4 x (#10 x 2” )Screw with
3/16” masonry plug intowall.
• Follow Step 6.
Drill 4 wall screws and washers
through perforated holes into studs.
Locker, tool and base cabinet: 4 Lag Screws and
4Wall washers
CornerWall Cabinet: 6 Lag Screws and 6Wall
washers