Installation Guide

25
Attach the Worktop Leg Support to the Worktop using the #8 - 5/8” Philips Head Screws.
3
A
Installation option A:
Attach one Worktop Support
Leg on each of the front edges
on the Corner Worktop. The
Worktop Support Legs should
be flush along the sides and
back of the worktop
B
Installation optionB:
Attach one Worktop Support
Leg flush to the end of one of
the two worktops.
C
Installation option C:
Attach the Worktop Tray, flush
with the end of the worktop.
Rotate remaining worktops into position and attach worktop to the support bracket using
#8 x 5/8” screws. If there are no additional worktops to install, proceed to Step 5.
4
A B
6
Install worktop wall supports into the
wall studs below the worktop using 2.5”
lag screws with 3/16” pilotholes.
5
Follow “Installing Worktop SideSupport
Tray “ instructions on page 23
to secure
the other end of the worktop(s).