Operating Guide
Table Of Contents
18
Compound Miter Saw
T-Molding Transition Strip
Connection Base
Interior/ Exterior Commercial
grade Silicone Sealant
9.5mm Floor
9.5mm NewAge
Flooring
Parts required
Cut the T-molding transition strip and
connection base to required length using
a compound miter saw.
Stick the connection base to the oor
adjacent to the adjoining ooring. Make
sure the wide edge of the connection base
is facing towards the ooring that is to be
laid.
Evenly apply silicone to the back side of
the connection base.
1
3
2
Installing T- Molding Transition Strip