Operating Guide

18
Compound Miter Saw
T-Molding Transition Strip
Connection Base
Interior/ Exterior Commercial
grade Silicone Sealant
9.5mm Floor
9.5mm NewAge
Flooring
Parts required
Cut the T-molding transition strip and
connection base to required length using
a compound miter saw.
Stick the connection base to the oor
adjacent to the adjoining ooring. Make
sure the wide edge of the connection base
is facing towards the ooring that is to be
laid.
Evenly apply silicone to the back side of
the connection base.
1
3
2
Installing T- Molding Transition Strip