How to Guide

15
Installing Pad Eye Plate
Option A: Wall Conguration
9A
10A 11A
Wall Mounted:
35”
Wall Mounted:
26”
Drill pilot holes into the solid wood using
a 3/16” drill bit.
Secure Pad Eye Plate (#24) to the
stud or joist using two 3” Lag Screws
(#17), and a 7/16” socket.
Wall Mounting: Measure and mark 26” vertically from the bottom of the Wall Mounted bracket (#6)
to the top of the pad eye plate (#24). Align the pad eye plate (#24) on the center of the stud and
the top of the eye plate below the level line and mark the wall for pilot holes.
26”
Side View
Front View
#24
#6
Wood
Stud
Warning:
Must bore into
3 inches of solid
wood for lag screw
(#17) to be fully
secured.
Side View