How to Guide
16
Perimeter Beam & Cable Assembly
Option A: Wall Conguration
Wall Mounted Cable
Assembly:
Insert a 5/16” Hex Bolt into
the 33rd hole of the side
perimeter beam.
Attach cable eyelet to side beam (#1/ #5) using 5/16” bolt (#21) , nut (#22) and fender washer (#23)
Insert a 5/16” Hex Bolt (#21) into the Front/First hole of the side perimeter beams. Slide Pully
cable cap (#18) onto the Hex Bolt and wrap the Cable Assembly around the pulley (#19). Slide
the Pulley Cable Cap onto the Hex Bolt and secure with a 5/16” lock nut (#22). Align tab on Pulley
Cable Cap with cutout in side frame.
Note:
To continue Wall Installation skip to page 19.
12A
13A