How to Guide

20
Note:
Ensure the acorn nuts are
on the outside of the front
perimeter assembly, as
shown.
Front
17
i
i
ii
Guide the mounting holes of the front beam into the shoulder rivets on the side perimeter beam.
Use a rubber mallet to seat the rivets with the top of the keyholes.
Interior View
18
Bolt together the front perimeter beams (#3 / #4) with the front perimeter bracket (#7) with eight
1/4” carriage bolts (#8) , washers (#9) and acorn nuts (#10). Begin with the vertical Bolts (i) followed
by the horizontal Bolts (ii)
19
Repeat step 18 for the opposite side of the beam
Wall Mounted
Ceiling Mounted