Installation Guide
20
WALL STUD
LOCKER
X4
Securing to Wall
Using (4) 1/4” x 2.5” lag screws and washers secure
each cabinet to wall stud from inside cabinet.
Parts Needed.
Bolt
(1/4” x 2.5”)
Wall Washer
(1/4”)
7
Note: Brackets are not designed to support the weight of a loaded cabinet. Cabinets
must be secured to the wall using supplied 1/4” x 2.5” lag screws.
Note: Slatwall Brackets for use with standard 3” slatwall Sold Separately. Check with your
slatwall supplier to determine the rated capacity of your slatwall. DO NOT OVERLOAD.
NewAge Slatwall Brackets are only compatible with standard 3” on center Slatwall.
Hanging Cabinets on Slatwall
1
Insert bolts through slatwall bracket.
Parts Needed.
Wall Bolt
(1/4” x 5/8”)
Wall Washer
(1/4”)
Slatwall Bracket
Lock Nut
(1/4”)
Note:
Do not load cabinet without rst
securing to the wall.