Installation Guide

12
Hanging Cabinets on Studded Wall
Step A. Determine the height off the ground you would like the base and locker
cabinets to be and make a horizontal mark at this position.
Step B. Next mark the width of each cabinet in the intended position and ensure
the wall studs fall at least 1.25” in from the edge of the cabinets.This will
ensure there is no interference with the edges of the cabinet and the
wall bracket when hanging the cabinet on the wall.
Step C. For corner installation begin by hanging corner cabinet first and continue
out from corner.
Note: Ensure there are two studs for the locker to be mounted on as it is easiest to start
the installation with the locker first. Due to the spacing of the wall studs it is possible that
some base or wall cabinets will only have one stud they will attach to; This is acceptable as
long as the cabinet is bolted to another securely mounted cabinet.
Parts Needed.
Lag Screw
(1/4”x 2.5”)
Wall Bracket
Floor
Wall
studs
mustfall
1.25”or
more
from
sidesof
cabinet
Wall
studs
mustfall
1.25”or
more
from
sidesof
cabinet
A
B
A Height from Floor
B
Width ofCabinets
WallStud
Cabinet Width
CabinetLayout
2
Planning the general position of cabinets.
1
Use stud finder to locate the studs
and mark the wall with a pencil.