Instructions / Assembly

23
Installing Worktop Side Support Tray
Open locker doors and locate upper
holes on side panels.
2
Parts Needed.
4
3
Align bracket holes with front or back
of locker and insert hex bolts through
holes.
1
4 X Lock Nut
(1/4”)
8 X
Washer
(1/4”)
4 X Hex Bolt
(1/4” x 5/8”)
2 X Tray
Repeat Steps 1-2 for 2nd side tray.
Lower worktop into position and attach
using (6) - #8 x 5/8” screws.
6 x Wood Screws
#8 x 5/8
5
X4
Install worktop wall supports in to the
wall studs below the worktop using 2.5”
lag screws with 3/16” pilot holes.