Installation Guide

19
Position one cabinet into position and
attach corner cabinets to brackets using
#8 x 5/8” wood screws.
Installing Corner Worktop
1
Position both cabinets in desired corner.
Locate studs and mark a level pencil line
at height of cabinets.
Align top of wall support bracket with
pencil line. Pre-drill 1/4” (6.5mm) holes,
then using (2) X 2.5 lag screw per bracket
attach corner wall support brackets into
wall studs.
2
Install Side Support Brackets on the
two base cabinets that will be adjacent
to corner worktop. See Step 2 in side
support brackets on page 18.
Parts Needed.
3
4 x Washer
(1/4”)
6 x # 8 x 5/8”
screw
4
2 x Wall Support
Bracket
2 x Worktop
Support Bracket
4 X
Wall Screw
(1/4” x 2.5”)
2 X Hex Bolt
(1/4” x 5/8”)
Attach remaining cabinets and
countertops. See page 17.
5