Instructions / Assembly

18
Installing Worktop
Side Support Bracket
Note: Support Bracket included with Lockers
A support bracket is to be used if the worktop is
added to the set without a secondary supporting
base/tool cabinet.
Open locker doors and locate holes on either side.
2
Tighten nuts & bolts.
Parts Needed.
4
3
Align bracket holes with locker holes
and insert hex bolts through holes.
1
2 X Lock Nut
(1/4”)
4 X Washer
(1/4”)
2 X Hex Bolt
(.25” x 5/8”)
X2
Use #8 x 5/8” wood screws and washers,
provided in the locker packaging.
X2
4 x Wood Screw
#8 x 5/8
5
X4 X2