Installation Guide


Securing Cabinets to Wall
1
Level cabinet
Gather parts.
2
Align cabinet
to stud marks.
• Follow steps 3 to 5.
• Drill 4 pilot holes through the
perforated strip with hammer drill &
masonry bit.
• Use 4 x (
2 ¼” x ¼” )Tapcon Concrete
Anchor into wall. (Not Included)
• OR 4 x (#10 x 2” )Screw with 3/16”
masonry plug into wall. (Not Included)
• Follow Step 6.
Use stud nder to locate the studs
and mark the wall with a pencil.
4
3
8BMM4DSFX
wYw
8BMM8BTIFS
w
5
Place cabinet tight
against the wall.
X4
6
Masonry.
Drill 4 wall screws and washers
through perforated holes into studs.
Wall & Locker:XBMMTDSFXTBOEXBTIFST
Corner Wall:XBMMTDSFXTBOEXBTIFST
Base & Tool Cabinet:XBMM4DSFXTBOEXBTIFST
Note: Wall brackets are not designed to support the weight of a loaded cabinet.
Cabinets must be secured to the wall using supplied 1/4” x 2.5” lag screws.
Note:
%POPUMPBEDBCJOFU
without rst securJOHUP
UIFXBMM