Installation Guide

5www.newageproducts.com

Align the side frame with

the bottom tray and

lower into position.

Aligning the mounting holes on the tray, insert and tighten the

supplied hex rivet nuts and washers to the side frame. Repeat

to opposite side.

Align the Door Panel

with the smaller holes on

each side fame.

Insert and tighten the supplied self tapping screws and

plastic washers.

Note:

The door can be installed on either side of the side frames.

Install Side Frames:

Install Door Panel:

Hardware:

4x Washer

(M6)

4x Hex Bolt

(1/4” x 5/8”)

8x Self Tapping Screw

with Plastic Washer