Installation Guide

Front
0” (0mm)
1”
(25.4mm)
End
2” (50.8mm)
1”
(25.4mm)
Front
End
Frame Assembly
Center the frame on the bottom side
of worktop based on the images
below.
66” (1676mm) Workbench 84” (2133mm) Workbench
Note: Align brackets based on cabinets to be
stored under the workbench
Insert leg posts at desired height and
secure using M8 x 60mm bolts, nuts,
and washers provided.
Pre-drill holes using a 3/32”
drill bit and secure frame to
worktop using M4 x 16mm screws
provided.
Stand and level workbench
Attach horizontal beam to leg
assembly using M8 x 16mm bolts
and M8 lock washers.
5
6
Thank you for purchasing a NewAge Product! Please give us a call or visit online if you have any questions.
Call 1.877.306.8930; for UK 0800.031.4069; e-mail at [e-mail]
3
2
1
Attach the underside bracket to the horizontal
beam using the M5 x 10mm Phillips head bolts.
Pre-drill holes and secure underside support to
worktop using three M4 x 16mm screws.
4