Installation Guide

9
11
1
Start by placing the left side panel
on its side (Item 7). Make sure the 2
bottom holes are facing you.
Take Item 9 and align it to the bottom
slots and hole. Make sure the two
holes at the bottom of the beam are
facing you as shown in image below.
Secure Item 9 to the side panel using
a M6 Flat washer (Item 1) and a hex
bolt(Item 3).
Take Item 11 and repeat steps 3 and 4
respectively.
2
Remove all items from packaging and
ensure all parts have been provided.
5
4
3
Assembling The Rack
Parts required
7
9
23 X Washer9 x Hex Head Tapping Screw 3 x Rack Hanging Bracket 12 X Hex Bolt
1 x Cordless Power Drill 1 x Adjustable wrench
1 x Socket driver wrench
3
1