Installation Guide

Drill a pilot hole using a 3/16” drill bit.

Note: Pilot hole must bore into 3 inches

of solid wood for lag screw to be fully

secured.

4in

Bold : 71.8 in

Pro: 79.8 in

68.75”

16in

24in

or.

Using a stud nder, locate and mark the center position of the studs on the wall. Ensure

they t the size of your install. Mark a line 4 inches above the oor and another line 71.8in (If

installing the bold 72in Wide Rack) or 79.8in (If installing the Pro 72in Wide Rack) on the wall.

Place a wall hanging bracket (Item 14) just below the top line and mark 2 holes on a stud

accordingly.

Assembling The Rack (Contd.)

Note: Install the 3 wall

hanging brackets over a

span of 68.75in as equally

as possible on studs.

68.75”