Installation Guide

6
www.newageproducts.com
Installing Casters
1
Flip cabinet upside down,
locate holes forming a square.
2
Open cabinet, remove any shelves or
loose items. Close and lock doors and
drawers.
Repeat steps 3 for each corner.
4
Parts Needed.
16 X Washer
(1/4”)
16 X Spring
(1/4”)
16 X Hex Bolt
(1/4” x 5/8”)
Bolt
Spring Washer
Flat Washer
Align caster holes and bolts to cabinet
using 4 Hex bolts, 4 spring washers and
4 (1/4”) washers per caster.
Return cabinet to upright position.
3
5
Note: Locking casters should be installed
on same end as side handle.
4in Casters