Performance and Performance Diamond 2.0 weight Warning: Warning: ExcessiveExcessive weight hazard! hazard! Use two or more people to move, assemble or install cabinets and locker to avoid back injury. Do not leave children unattended near cabinets. High risk of tipping if cabinets are installed incorrectly: securely attachUse cabinets to the to avoid serious injury. two orwall more people to move, assemble, or For assistance, call 1.877.306.8930; for UK 0800.031.
INDEX Product Overview: Unpacking - 3 Tools Needed - 3 Included Quantities - 4 Included Parts - 4 Weight Capacity - 5 Worktop Options - 5 Installation Options - 6 Installation Overview: Floor Installation - 7 Wall Mount Installation - 8 Slatwall Installation - 9 Sets with Casters - 10 Corner Set Installation - 11 Hanging Wall Cabinets: On Studded Wall -12 On Slatwall - 13 Securing Wall Cabinets: To Wall - 14 To Other Cabinets - 15 Fastening Cabinets on Casters - 16 Installing Worktop: Standard installation
Unpacking • • • • Begin by placing the package on a covered flat surface. Remove all cardboard, foam packaging material and clear plastic bags. Dispose / recycle all packaging materials. Verify all the contents in the box and gather the required tools. See “Tools Needed” , and “Included Quantities” list.
Included Quantities Mobile Tool Drawer Base Cabinet 30in Locker Wall Corner Wall 42in Locker Hardware Pack 1 1 1 1 1 1 Cabinet Leg 4 4 0 0 0 4 Leveling Foot 4 4 0 0 0 4 Adjustable Steel Shelves 1 3 0 0 0 3 Handles 2 2 0 0 4 2 Closet Rod 0 1 0 0 0 1 Locker Support Bracket 0 1 0 2 0 1 Joining Bracket 1 0 0 2 0 0 Worktop Wall Support 0 0 0 2 0 0 EVA Foam Drawers Liners 0 0 0 0 4 0 Utility Hole Grommet 1 1 0 0 0 1 NewAge Logo 1
Weight Capacity 150 lbs. 150 lbs. 250 lbs per foot. 1000 lbs. per Set of 4 100 lbs. 150 lbs. Wall Cabinets Max 100 lbs. 150 lbs. 200 lbs. 200 lbs. 150 lbs. 100 lbs. 3in Casters 600 lbs. / set of 4 150 lbs. / caster 4in Casters 1000 lbs. / set of 4 250 lbs. / caster 200 lbs. 100 lbs. 100 lbs. 200 lbs. 100 lbs. 200 lbs. Base Cabinet Max 600 lbs. Tool Cabinet Max 600 lbs. Locker Max 800lbs. 200 lbs. Worktop on Cabinets Max 200 lbs. / Cabinet Worktop Options 21” Corner Worktop 48” Worktop.
Installation options for Cabinets Important information: Please read before beginning installation. • • • • • • Option 1. - see page 7. Floor mount with adjustable levelling legs. Layouts shown are only examples.All cabinets are mobile and can be configured in a variety of different layouts. Plan layout and measure space before installing. Locate wall studs prior to installation. Consider the location of electrical outlets when planning layout. Measure height of cabinets for clearence.
Option 1 Floor Installation Overview Plan layout before installing cabinets. 1 Attach feet to cabinets. See feet installation on page 20. • It is recommended to begin installation with Locker cabinet. • Cabinets must be fully secured to wall using (4) wall screws per cabinet. • Casters can not be installed on locker cabinets. 2 Begin by securing Locker cabinet to wall in determined postion. See Page 14 for full instructions. 3 Position and secure remaining cabinets to wall.
Option 2 Wall Mount Installation Overview Plan layout before installing cabinets. 1 Begin by attaching Locker cabinet to wall. See page 12 for full instructions on hanging cabinets. • Determine height cabinets will be installed off the ground. • It is recommended to begin installation with Locker cabinet. • Install cabinets one at a time. • Cabinets must be fully secured to wall using (4) wall screws per cabinet. 2 Position and secure remaining base cabinets, and wall cabinets to wall. See page 12.
Option 3 Slatwall Installation Overview Plan layout before installing cabinets. 1 Begin by attaching locker cabinet to slatwall using slatwall bracket. See page 13 for slatwall hanging instructions. 3 Attach cabinets together. See page 15. • Determine height cabinets will be installed off the ground. • Slatwall bracket sold seperately • Slatwall brackets for use with standard 3” slatwall. • Check slatwall manufacturer for rated load capacity. • Do not overload.
Option 4 Caster Set Installation Overview Plan layout before installing cabinets. 1 Attach feet to locker cabinets. Attach casters to base cabinets. See full installation on pages 20 & 21. • It is recommended to begin installation with Locker cabinet. • Install cabinets one at a time. • Locker and wall cabinets must be fully secured to wall using (4) wall screws per cabinet. • Casters not included in all sets. 2 Begin by securing Locker cabinet to wall in determined postion.
Option 5 Corner Cabinet Installation Overview 1 Attach feet to cabinets. See full feet installation on page 20. 2 Install corner wall cabinets followed by remaining wall cabinets. See full instructions on page 14. 3 Install corner worktop supports and base cabinets. See page 19. 4 Install corner worktop. See page 19. 5 Position,secure and attach all remaining cabinets and worktops. See pages, 14, 15 and 17.
Note: Hanging Cabinets on Studded Wall 1 Gather parts. Wall Screw (1/4” x 2.5”) 4 Wall Screws per cabinet 4 Washers per cabinet 3 Height 1 2 Use stud finder to locate the studs and mark a line on the wall with a pencil at desired height. 4 Attach remaining base cabinets (2), and wall cabinets(3) to wall using same method as locker cabinet(1)attachment. Wall Washer (1/4”) Begin by attaching locker to wall.
Hanging Cabinets on Slatwall Note: Slatwall Brackets for use with standard 3” slatwall Sold Separately. Check with your slatwall supplier to determine the rated capacity of your slatwall. DO NOT OVERLOAD. NewAge Slatwall Brackets are only compatible with standard 3” on center Slatwall. Parts Needed. 1 Insert bolts through slatwall bracket. 4 Align bolt with slots on back of cabinet and hang cabinet.
Securing Cabinets on Studded Wall 1 Use stud finder to locate the studs and mark the wall with a pencil. Note: Do not load cabinet without first securing to the wall. 2 Gather parts. Wall Screw (¼” x 2½”) Wall Washer (¼”) Base, Locker, Tool and Wall: 4 wall screws and 4 washers Corner Wall: 6 wall screws and 6 washers 3 Place cabinet tight against the wall. 6 Pre-drill (4) 1/4” (6.5mm) then drill 4 wall screws and washers through perforated holes into studs. 4 Align cabinet to stud marks.
Fastening Cabinets 1 Note: All drawers must be removed prior to fastening cabinets together.See Page 22 for drawer removal instructions. Parts Needed. 4 X Hex Bolt (¼” x ⁵/₈”) 8 X Washer (¼”) 2 4 X Lock nut (¼”) Align bolts, tighten lightly. X4 3 Level cabinets and tighten all bolts.
Fastening Cabinets with Casters Parts Needed. 8 x Foot Attachment Screw 2 1 2 x Joining Brackets Flip cabinets and push sides together, locate holes on edges. 1 1 4 16 Open cabinets, remove any shelves, drawers or loose items. 3 1 1 Attach casters and fasten cabinets together. See pages 15. & 21. 5 Align holes with joining plate and attach using foot attachment screws.
Mounting the Worktop 1 Parts Needed. Place Worktop on cabinets. Locate the punch holes on the tops of the cabinets. X2 X2 I 4 x Wood Screw #8 x 5/8 2 Drill into the worktop using the #8 x 5/8” wood screws. 3 Optional: For locker support bracket. See Page 18.
Installing Worktop Side Support Bracket 1 Parts Needed. 2 2 X Lock Nut (1/4”) 2 X Hex Bolt (.25” x 5/8”) 4 X Washer (1/4”) 4 x Wood Screw #8 x 5/8 Note: Support Bracket included with Lockers A support bracket is to be used if the worktop is added to the set without a secondary supporting base/tool cabinet. Open locker doors and locate holes on either side. Align bracket holes with locker holes and insert hex bolts through holes. 3 Tighten nuts & bolts.
Installing Corner Worktop Parts Needed. 6 x # 8 x 5/8” screw 4X Wall Screw (1/4” x 2.5”) 1 Install Side Support Brackets on the two base cabinets that will be adjacent to corner worktop. See Step 2 in side support brackets on page 18. 4 x Washer (1/4”) 2 x Wall Support 2 x Worktop 2 X Hex Bolt Bracket Support Bracket (1/4” x 5/8”) 2 4 Position both cabinets in desired corner. Locate studs and mark a level pencil line at height of cabinets.
Installing Feet Parts Needed. 1 Open cabinet, remove any shelves or loose items. Align leg with edge of cabinet. Screw in 4 x Foot attachment screws & leveling foot. 16 x Foot Attachment Screws 4x M10 x 65mm Levelling Foot 4 x Cabinet Leg 2 Flip cabinet upside down, locate holes at corners. 3 4 Repeat steps 3 for each corner. 5 20 Stand & level feet.
Installing Casters Parts Needed. 4 x Casters 16 X Hex Bolt (1/4” x 5/8”) 16 X Washer (1/4”) 16 X Lock Nut (1/4”) 2 Flip cabinet upside down, locate holes forming a square. 4 Repeat step 3 for each caster. Note: Install casters with brakes on front of cabinet. 1 Open cabinet, remove any shelves, drawers or loose items. 3 Align casters with holes. Attach with 4 hex bolts, washers, and nuts.
Installing the Drawers Inserting Drawers. Align Rails Slide In Removing Drawers.
Installing Handles 1 Parts Needed. Handle 2 Align Handle to holes on doors or drawers. Handle Bolt (M4 x 30mm) Base/Locker: 2 Handles and 4 Handle Bolts Tool Cabinet: 3 Handles and 6 Handle Bolts 3 Screw in bolts using number a #2 Philips head screwdriver being careful not to overtighten bolts.
Stacking Cabinets Parts Needed. Note: Do not exceed weight capacity of feet. See page 5. Installing cabinets on stacked cabinets is not recommended. 1 Position a second base cabinet on top of an existing base cabinet. 3 Attach cabinets using the supplied 1/4” x 5/8” hex bolts, washers, and nuts. 4 X Hex Bolt (1/4” x 5/8”) 8 X Washer (1/4”) 4 X Lock Nut (1/4”) 2 Locate punch holes on adjoining surface and insert bolts. 4 Tighten all bolts.
Inserting Locker Utility Rod 1 Tilt Rod at a slight angle. 3 Ensure Rod tabs engage in slots on side panel when lowering into position. 2 Insert and bring to horizontal position above slots in wall.
Inserting Cabinets Shelves 1 Stand cabinet up. 2 Insert shelf at a slight angle. 3 Rotate shelf to horizontal position. 4 Push shelf down into grooves. 5 Ensure shelf tabs engage in slots of side panel when lowering into position to secure. 6 Insert remaining shelves.
Utility Access 1 2 Insert rubber grommet into cut-out hole in bottom panel. Using box knife cut along perforation in rubber grommet to create hole. Utility hole allows easy access to electrical outlet.
Magnetic Racing Stripe Note: Racing stripe not available with diamond plate doors. The Racing Stripe can be installed on either door. To remove stripe follow steps 1-3. 1 Remove the 2 plastic plugs holding in the racing stripe at the top of door. 2 Tilt stripe off top of door. 3 Lower and remove from slot on bottom of door. 4 Attach Racing Stripe on opposite door following reverse order. HANDLE WITH CARE: Racing Stripe can easily bend and crease.
Manufacturer Warranty Limited Lifetime When this product is installed, operated and maintained according to the instructions attached to or furnished with the product, NewAge Products Inc. will replace the defective product or parts if the part fails as a result of defective materials or workmanship for the Lifetime of the product. NEWAGE PRODUCTS INC. WILL NOT PAY FOR: 1. Service calls to correct the installation of any NewAge products or to instruct you how to use or install them. 2.
