Assembly Instructions
7
www.newageproducts.com
Hanging Slatwall Backsplash on Studded Wall
Installing Backsplash for Fixed Cabinets
Place xed bottom strip tight
against the wall and the top of the
worktop. If your cabinet set does
not have lower cabinets with a
worktop proceed to page 9
Interlock bottom of Slatwall section
with the top of xed bottom strip.
Repeat step 5 to securely fasten
“Slatwall Section”.
Interlock Top Magnet Cover on top
of the slatwall section and secure
in position with magnets.
Pre-drill 3mm (1/8”) holes into each
stud then fasten slatwall section to
each wood stud with screws provided.
Repeat steps 5 & 6 for remaining
slatwall sections.
Masonry.
4
5
76
8
• Follow steps 4 to 8.
• Drill pilot holes through the perforated
strip each 16in with hammer drill &
masonry bit.
• Use 2¼” x ¼” Tapcon Concrete Anchor
for each pilot hole. (Not Included)
• OR use #10 x 2” Screw with ⁄” masonry
plug for each pilot hole. (Not Included)